RDF-4001
The main tank penetration for a continuous level application, with a threaded port in the hex and a center bore for the stem.
RDF-4201
Flange for WEMA style tank fittings. Shares the port and bore options of RDF-4001.
RDF-4002
Cable gland overmolded onto the lead for a fully sealed penetration, with the strain relief formed in the same shot.
RDF-4404
Sets a travel limit part way down the stem for a multi point assembly.
RDF-4403
Closes the bottom of the stem and stops the float in a single part.
RDF-4501-R
The larger foamed polypropylene float, with a choice of magnet form.
RDF-4502-S
Wider and shorter than the RDF-4501, for a different displacement in the same bore.
Everything in this series is built around two stem sizes, so parts interchange along the assembly.
| Part | Function | Stem interface |
|---|---|---|
| RDF-4001 | Tank fitting, 1 1/2 and 2 NPT external | 1/4 Sch 40 PVC pipe, 1/2 in nylon tube or 1/4 NPT |
| RDF-4201 | WEMA style flange | As RDF-4001 |
| RDF-4404 | Intermediate float stop | 1/4 Sch 40 PVC pipe or 1/2 in nylon tube |
| RDF-4403 | End plug and float stop | 1/4 Sch 40 PVC pipe or 1/2 in nylon tube |
| RDF-4002 | Waterproof overmolded cable, integral strain relief | 3/8 NPT |
| Part | Diameter | Length | Magnet | Specific gravity |
|---|---|---|---|---|
| RDF-4501-R | 1 1/2 in | 2 1/8 in | Round, square or ring | Ask |
| RDF-4502-S | 1 5/8 in | 1 3/4 in | Round, square or ring | 0.6 or higher |
Confirm the specific gravity for RDF-4501-R when you inquire rather than assuming it matches the RDF-4502. As with every float in the catalog, either part can be molded to any density above its minimum.
All floats are available in nylon for diesel and fuel oil applications. Give us the fluid when you inquire and we will tell you which material the service needs.
Tell us the tank thread, the stem you are running and how many switch points you need.
